Roland V-Synth GT - Patch Common (Settings Shared by the Entire Patch); Editing the Patch Common Parameters

63
Patch Mode (Editing a Patch)
Here we’ll explain the parameters that are used in common by the entire patch ( Patch Common parameters ).
1.
Press [PATCH] to access the Patch Play screen.
2.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.05-03.eps_50
3.
In the pulldown menu, touch <Patch Common>.
The Patch Common screen appears.
fig.05-11-ps.eps_50
4.
The parameters are organized into several editing groups. Touch one of the buttons at the bottom of the screen to
select the edit group containing the parameters you want to set.
5.
Touch one of the tabs in the left of the screen to select the desired editing screen.
Patch Common (Settings Shared by the Entire Patch)
Editing the Patch Common Parameters
V-Synth-GT_e.book 63 ページ ２００７年４月９日 月曜日 午後１時４６分