Roland V-Synth GT - Time Trip Pad

204
System Mode (Settings Common to All Modes)
fig.08-12.eps_50
Time Trip Pad
Parameter
Value Description
X Assign-XY
OFF
No message will be transmitted.
CC01–31, 33–95
(Controller numbers 1–31, 33–95)
Specifies the MIDI controller number that will be
transmitted by movements in the ‘X’ (horizontal) di-
rection when the Time Trip pad is in XY mode.
X Assign-TT (X Assign-Time Trip) OFF
No message will be transmitted.
CC01–31, 33–95
(Controller numbers 1–31, 33–95)
Specifies the MIDI controller number that will be
transmitted by movements in the ‘X’ (horizontal) di-
rection when the Time Trip pad is in Time Trip mode.
Y Assign-XY OFF No message will be transmitted.
CC01–31, 33–95
(Controller numbers 1–31, 33–95)
Specifies the MIDI controller number that will be
transmitted by movements in the ‘Y’ (vertical) direc-
tion when the Time Trip pad is in XY mode.
Y Assign-TT (Y Assign-Time Trip) OFF
No message will be transmitted.
CC01–31, 33–95
(Controller numbers 1–31, 33–95)
Specifies the MIDI controller number that will be
transmitted by movements in the ‘Y’ (vertical) direc-
tion when the Time Trip pad is in Time Trip mode.
V-Synth-GT_e.book 204 ページ ２００７年４月９日 月曜日 午後１時４６分