151
Vocal Designer
fig.06d-04-j.eps
Mic effects such as equalizer are provided to enhance the mic input.
You can use these to adjust the character of the mic sound, and make it easier for you to sing.
As mic effects, equalizer (EQ), noise suppressor (Noise Sup), and compressor (Comp) are provided.
These mic effect settings can be stored together as mic settings, and called up when necessary.
Eight sets of mic settings can be stored. This allows you to easily use settings for Vocal Designer that are appropriate
for a particular situation.
Note that when you edit the parameter value, the mic setting will also change simultaneously (and will be
automatically saved).
Mic settings are System settings. They will be remembered even when you turn off the power. If you want to return all
eight mic settings to the factory-set condition, execute a Factory Reset (p. 235).
fig.06d-11-ps.eps
Mic Settings
Mic Type
Parameter
Value Description
Vocal Designer Mic Settings
Mic Setting
1–8
Selects the mic setting.
Edit Mic Name
Assigns a name for the mic setting.
When you touch this, the Mic Setting Name screen will appear.
Here you can assign a name to the mic setting in the same way as
when assigning a name to a patch, etc. (p. 59).
Mic Level
Level
0–127
Adjusts the volume of the mic input.
Vocal Designer
VocoderTVA Tone-FX
Mic
Settings
V-Synth-GT_e.book 151 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
Need help?
General
