Roland V-Synth GT - Screen Saver

229
Utility Mode
This feature allows you to have a simple animation be displayed whenever the V-Synth GT has not been operated for
a certain period of time.
Because of the characteristics of the TFT liquid crystal display used in the V-Synth GT, leaving the same screen displayed
for an extended time may cause that image to be burned into the screen. To avoid this, we recommend that you use
the screen saver.
1. Press [UTILITY] to access the Utility Menu screen.
2.
Touch <Screen Saver>.
The Screen Saver screen appears.
fig.09-45-ps.eps_50
3.
Touch the desired screen saver image to select it.
You can touch <Preview> to get a look at the screen saver image at the size of the actual screen.
Screen Saver
Parameter Value Description
Screen Saver Time OFF,
1– 60 min
Sets the time (minutes) until the screen saver begins working.
If this is OFF, the screen saver will not appear.
V-Synth-GT_e.book 229 ページ ２００７年４月９日 月曜日 午後１時４６分