Roland V-Synth GT - Bender

212
System Mode (Settings Common to All Modes)
fig.08-26.eps_50
Bender
Parameter
Value Description
Modulation Local Sw
(V-LINK Modulation Local Switch)
OFF, ON
Specifies whether the modulation lever will be disconnected from the internal
sound generator in V-LINK mode (OFF) or not disconnected (ON).
Bender Local Sw
(V-LINK Pitch Bend Local Switch)
OFF, ON
Specifies whether the pitch bend lever will be disconnected from the internal
sound generator in V-LINK mode (OFF) or not disconnected (ON).
Aftertouch Local Sw
(V-LINK Aftertouch Local Switch)
OFF, ON
Specifies whether keyboard aftertouch will be disconnected from the internal
sound generator in V-LINK Mode (OFF) or will not be disconnected (ON).
Modulation Assign
(V-LINK Modulation Assign)
Specify the V-LINK function that
will be controlled when you oper-
ate the modulation lever.
Bender Assign
(V-LINK Pitch Bend Assign)
Specify the V-LINK function that
will be controlled when you oper-
ate the pitch bend lever.
Aftertouch Assign
(V-LINK Aftertouch Assign)
Specify the V-LINK function that
will be controlled by keyboard af-
tertouch.
OFF The modulation lever/pitch bend lever/keyboard aftertouch will not be used.
PLAYBACK-
SPEED
Playback speed
DISSOLVE-
TIME
Dissolve time (time over which the image switches)
AUDIO LEVEL Volume during audio playback
COLOR-CB Color Cb (color-difference signal)
COLOR-CR Color Cr (color-difference signal)
BRIGHTNESS Brightness
VFX1 Visual effects 1
VFX2 Visual effects 2
VFX3 Visual effects 3
VFX4 Visual effects 4
OUTPUT-FADE Output fade
V-Synth-GT_e.book 212 ページ ２００７年４月９日 月曜日 午後１時４６分