75
Patch Mode (Editing a Patch)
Erasing a Pattern (Clear)
Here’s how to erase data from the pattern. You can erase a specific line or the entire pattern.
1.
To specify a line that you want to erase, move the cursor to that line.
2.
Touch <Clear>.
A window like the following will appear.
fig.02-09e_50
3.
To erase a line of data, touch <LINE CLEAR>. To erase the entire pattern, touch <ALL CLEAR>. If you decide you
don’t want to clear anything, touch <CANCEL>.
V-Synth-GT_e.book 75 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
