Managing the AP
Enabling Other Management Access Options
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 170
NOTE Remember to open any relevant firewall ports between the AP and the
firmware upgrade/management server. For example, if HTTPS is used for firmware
upgrades, open TCP port 443 on the firewall to allow connections through port 443.
If FlexMaster server is used, open TCP ports 80 and 443 for HTTP/HTTPS
communications, and TCP port 8082 for AP wake-up commands.
Continue with the following, as required:
• Viewing FlexMaster Management Status
• Pointing the AP to FlexMaster
To Next Page
Loading...
