Web-based Configuration Guide Wi-Fi Network Settings
90
2. Enabling One-click Login for an SSID
(1) Log in to Ruijie Cloud, choose Project > Configuration > Devices > Wireless > SSID,
and select a network that needs to configure wireless authentication.
(2) If the SSID that needs to enable wireless authentication is not created, click to
open the SSID configuration page. If the SSID that needs to enable wireless
authentication is created, click in the Action column. The following content only
describes configurations related to wireless authentication. For details about other
SSID configuration parameters, see the Ruijie Cloud Cookbook.
(3) Enable Auth (disabled by default) and configure authentication-related parameters.
After the configuration, click OK to save the configurations.
Note
When Encryption Mode is set to a value other than WPA2-Enterprise(802.1x), Auth is
available and you can select whether to perform wireless authentication.
Mode: Set it to Captive Portal.
Seamless Online: Determine whether to enable Seamless Online as required, which