Web-based Configuration Guide Network Settings
132
For RG-RAP2260(G), RG-RAP2260(E), RG-RAP6260(G), RG-RAP6262(G), RG-RAP2260(H), RG-
RAP6260(H), RG-RAP6260(H)-D, RG-RAP2266, RG-RAP2260, RG-RAP1261, RG-RAP1260 and
RG-RAP6262 models: In Local Device mode, choose Network > LAN > LAN Settings
For other RAP models: Choose ( WLAN > APs > Manage >) Network > LAN > LAN
Settings
Click Edit. In the displayed dialog box, enter the IP address and subnet mask, and click
OK. Change the IP address of the LAN port. Enter the new IP address in the browser and
log in to the device again to configure and manage the device.
To Next Page
Loading...
