Web-based Configuration Guide Network Settings
135
(2) Select the Wi-Fi signal of the upper-layer device that you want to extend. The
configuration items of the local device are displayed. If the signal of the upper-layer
device is encrypted, enter the Wi-Fi password of the upper-layer device.
(3) Configure Local Router Wi-Fi. You can select New Wi-Fi or Same as Primary Router Wi-
Fi.
○ If you select Same as Primary Router Wi-Fi, the Wi-Fi settings of the router are
automatically synchronized with those on the primary router. Generally, clients
merge Wi-Fi signals with the same name into one Wi-Fi signal, and they can search
out only the Wi-Fi signal of the primary router.
○ If New Wi-Fi is selected, you can set a local Wi-Fi name and password. Clients will
search out different Wi-Fi signals.
To Next Page
Loading...
