Ruijie Reyee RG-RAP Series User Manual

Web-based Configuration Guide Network Settings
155
Click Edit corresponding to the default VLAN, and fill in a local address of no more than
64 bits in the IPv6 Address/Prefix Length column. This address will also be used as the
IPv6 address prefix.
IPv6 Assignment specifies the method for assigning IPv6 addresses for clients. The
following options are available:
 Auto: Both DHCPv6 and SLAAC are used to assign IPv6 addresses to clients.
 DHCPv6: DHCPv6 is used to assign IPv6 addresses to clients.
 SLAAC: SLAAC is used to assign IPv6 addresses to clients.
 Null: No IPv6 addresses are assigned to clients.
The setting of IPv6 Assignment is determined by the protocol supported by intranet
clients. If you are not sure about the protocol supported by intranet clients, select Auto.
You can click Advanced Settings to configure more address attributes.

Ruijie Reyee RG-RAP Series Specifications

General

Brand	Ruijie
Model	Reyee RG-RAP Series
Category	Wireless Access Point
Language	English