7
2. Creating a Network Project
Click Start Setup to configure the Internet connection type, Wi-Fi network and
management password.
(1) Network Name: Identify the network where the device is located.
(2) Internet: Configure the Internet connection type according to requirements of the
local Internet Service Provider (ISP).
○ DHCP: The access point detects whether it can obtain an IP address via DHCP by
default. If the access point connects to the Internet successfully, you can click Next
without entering an account.
○ PPPoE: Click PPPoE, and enter the username, password, and service name. Click
Next.
○ Static IP: Enter the IP address, subnet mask, gateway, and DNS server, and click
Next.
(3) SSID and Wi-Fi Password: The device has no Wi-Fi password by default, indicating that
the Wi-Fi network is an open network. You are advised to configure a complex
password to enhance the network security.
To Next Page
Loading...
