104 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 200 - PLU Price/HALO Programming
If a PLU is open, set the HALO (high amount lock out) here. If a PLU is preset set the preset price
here. If a PLU is set with gallonage status, enter the price per gallon here. (Enter price per gallon in
tenths of a penny, i.e. 1299 for $1.29 9/10 per gallon.)
1. Turn the control lock to the P position.
2. To begin the program, enter 2 0 0, press the SBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard or scan the item.
• If sequential PLUs are to receive the same status, press the first PLU key and then
press the last PLU key.
• Enter the number of the PLU (up to 15 digits) and press the PLU key.
• Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the PLU key. Enter the last number in the range; press the PLU key.
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset
price. (The maximum preset price you can enter is $50,000.00.)
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
2 0 0 SBTL
PLU
PLU PLU
PLU
PLU PLU
CASH
X/TIME
Price/HALO
To Next Page
Loading...
Need help?
General
