164 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 1100 - Cash-In-Drawer Limit Programming
You can set a cash-in-drawer limit. When cash in drawer exceeds the limit a warning will display on
the screen. You must press CLEAR to remove the warning and continue operations. The warning will
continue to appear at the completion of every transaction with the limit exceeded, until you use the
PAID OUT function to remove cash from the drawer.
Programming the Drawer Limit
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
4. Press the CASH key to finalize the program.
1 0 0 SBTL 1
CASH
X/TIME
Enter the cash
limit, up to 8
digits
To Next Page
Loading...
Need help?
General
