156 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 700 – Logo/Endorsement Message Programming
Programming the Receipt/Check Endorsement Message
A preamble message of up to six lines can be printed at the top of each receipt; a postamble message
of up to six lines can be printed at the bottom of each receipt, and an endorsement message of up to ten
lines can be printed when a check is endorsed on an optional slip printer. Each line can consist of up
to 32 characters.
1. Turn the control lock to the P position.
2. To begin the program, enter 7 0 0, press the SBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X Message Line X Message Line
1
1
st
line of Preamble
12
6
th
line of Postamble
2
2
nd
line of Preamble
13
1
st
line of Endorsement
3
3
rd
line of Preamble
14
2
nd
line of Endorsement
4
4
th
line of Preamble
15
3
rd
line of Endorsement
5
5
th
line of Preamble
16
4
th
line of Endorsement
6
6
th
line of Preamble
17
5
th
line of Endorsement
7
1
st
line of Postamble
18
6
th
line of Endorsement
8
2
nd
line of Postamble
19
7
th
line of Endorsement
9
3
rd
line of Postamble
20
8
th
line of Endorsement
10
4
th
line of Postamble
21
9
th
line of Endorsement
11
5
th
line of Postamble
22
10
th
line of Endorsement
4. If you are programming using an alpha keyboard overlay, type up to 32 descriptors on
the overlay and press the SBTL key.
If you are programming using descriptor codes, enter up to 32 three-character codes and
press the SBTL key.
5. Press the CASH key to finalize the program.
X
X/TIMEX
CASH
Type up to 32
descriptor keys
SBTL
SBTL
Enter up to 32 three-
character codes
7 0 0 SBTL