ER-5200M/5240M Electronic Cash Register P-Mode Programming • 163
Program 1000 - NLU Code Number Programming
NLU are fixed keys on the keyboard (like traditional department keys) that access specific PLUs.
On the ER-5200M default keyboard, there are 117 NLU keys (15 NLU keys on the 5240M) and the
PLU# assigned to the NLU key is the same, i.e. NLU key number one is PLU #1. However, with this
program, you can assign any PLU number you wish to any one of the NLU keys.
Programming the NLU Code Number
1. Turn the control lock to the P position.
2. To begin the program, enter 1 0 0 0, press the SBTL key.
3. Enter the new PLU code number you wish to use for this NLU key, and press the NLU
key on the keyboard you wish to program. Press the same NLU key again.
4. Repeat step #3 to program additional NLU locations, or press CASH to finalize the
program
0 0 0 SBTL 1
CASH
PLU Code
NLU KEY
SAME
KEY
To Next Page
Loading...
Need help?
General
