Sam4s ER-5200M - Program 1600 - Machine Number Programming

168 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 1600 - Machine Number Programming
The machine number is printed on the register receipt. Program a machine number so that any receipt
or journal can be identified with the store or register where the transaction took place.
Programming the Machine Number
1. Turn the control lock to the P position.
2. To begin the program, enter 1 6 0 0, press the SBTL key.
3. Enter a machine number (up to 5 digits); press the X/TIME key.
4. Press the CASH key to finalize the program.
6 0 0 SBTL 1
CASH
X/TIME