26 • Operations ER-5200M/5240M Electronic Cash Register
Clerk Sign-On/Sign-Off
See "System Option Programming”, to review your clerk options: (System option #2 allows you to
select direct or code entry sign on, option #3 allows you to select stay-down or pop-up operation, and
option #26 allows you select clerk interrupt operations.)
Depending on how your machine has been programmed, sign-on will take place only at the beginning
of a shift (stay-down), or may have to be repeated for each transaction (pop-up). Normally, if your
machine has been programmed for stay-down clerks, the clerk currently signed on must be signed off
before another clerk may be signed on. If you have selected the clerk interrupt option, a new clerk can
be signed on in the middle of a transaction. In this circumstance, the initial transaction is suspended.
When the interrupt transaction is completed, the suspended transaction can be continued.
Check with your store manager to see which options have been selected for your register.
Before any transaction may take place, a clerk must be signed on. Clerk sign-on is accomplished in
one of two ways:
Direct Sign-On
If the direct sign-on method is selected, enter the
clerk number and press the clerk key.
To sign the clerk off, enter 0 (Zero) and press the
clerk key.
DATE 10/15/2002 SUN TIME 08:37
================================
CLERK LOG IN
================================
CLERK 1 01
CLERK LOG IN TIME 09:06
CLERK 1 No.000001 00001
DATE 10/15/2002 SUN TIME 08:37
================================
CLERK LOG OUT
================================
CLERK 1 01
CLERK LOG OUT OUT 09:06
CLERK 1 No.000001 00001
CLERK
Clerk # (1-10)
0 CLERK
To Next Page
Loading...
Need help?
General
