Sam4s ER-5200M User Manual

110 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 400 – PLU Delete Programming
NOTE: To delete a PLU, all totals for the PLU must be cleared from Z reports (including Stock
and PLU reports.)
1. Turn the control lock to the P position.
2. To begin the program, enter 4 0 0, press the SBTL key.
3. Select the PLU or PLUs you wish to program in one of the following ways:
• Press a PLU key on the keyboard or scan the item.
• Press the first PLU key that is to be deleted and press the last PLU key.
• Enter the number of the PLU you wish to delete and press the PLU key.
• Enter the number of the first PLU in a range you wish to delete and press the PLU
key. Enter the last number in the range; press the PLU key.
4. Press X/TIME key.
5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the
program.
4 0 0 SBTL
PLU
PLU PLU
PLU
PLU PLU
X/TIME
CASH

Sam4s ER-5200M Specifications

General

Brand	Sam4s
Model	ER-5200M
Category	Cash Register
Language	English