Sam4s ER-5200M User Manual

ER-5200M/5240M Electronic Cash Register Management Functions • 75
Sample Reports” on page 171 for an example of each report.
Registers programmed with pop-up clerks must be signed on in the REG control lock position prior to
taking reports.
Running a Report – General Instructions
1. Refer to the “Report Table” on page 36.
2. Select a report type and the report mode.
3. Turn the control lock to the position indicated.
4. Enter the key sequence for the report you have selected.

Sam4s ER-5200M Specifications

General

Type	Electronic Cash Register
Display	LCD Display
Receipt Printer	Thermal Printer
Connectivity	USB, RS-232
Paper Width	58 mm
Memory Capacity	8 MB
Power Source	AC 100-240V