84 • S-Mode Programming ER-5200M/5240M Electronic Cash Register
Function Key Assignment Programming
Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as PREVIOUS BALANCE and SERVICE, which are not placed on the
default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL, for security
reasons.
Please note the following limitations:
• If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
• You can reassign keys only in locations that are programmable. See "Keyboards" on page
17, where the key locations that may be programmed are identified.
To Assign a Function Key to a Location
1. Turn the control lock to the S position.
2. Enter 7 0 and press the SBTL key.
3. Refer to page 82 to find the code for the key you wish to assign. Enter the code and
press the location you wish to program. Repeat this step to assign another key.
4. Press the CASH key to finalize key assignment programming.
0
SBTL 7
Key Code
Key
Locati
n
CASH