152 • P-Mode Programming ER-5200M/5240M Electronic Cash Register
Program 801 - Drawer Assignment
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0 1, press the SBTL key.
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
4. Enter a drawer assignment (0 (no drawer), 1 (default), or 2); press the SBTL key.
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to finalize
the program.
Program 810 - Clerk Descriptor Programming
Program descriptors by typing descriptors on the alpha keyboard overlay or by entering three
digit alpha character codes. To enter descriptors by three digit alpha character codes you must
add a value of ‘1’ to system option #25 (See “System Option Programming” on page 112).
1. Turn the control lock to the P position.
2. To begin the program, enter 8 1 0, press the SBTL key.
3. Enter the number (1-99) of the clerk you wish to program; press the X/TIME key.
4. If you are programming using an alpha keyboard overlay, type up to 18 descriptors on
the overlay and press the SBTL key.
If you are programming using descriptor codes, enter up to 18 three-character codes and
press the SBTL key.
5. Press the CASH key to finalize the program.
8 0 1 SBTL
X/TIME
SBTL
Enter 0, 1 or 2
CASH
8 1 0 SBTL
X/TIME
CASH
Type up to 18
descriptor keys
SBTL
SBTL
Enter up to 18 three-
character codes
To Next Page
Loading...
Need help?
General
