Sam4s ER-5200M - Program 1200 - Check Change Limit Programming

ER-5200M/5240M Electronic Cash Register P-Mode Programming • 165
Program 1200 - Check Change Limit Programming
Use this program to set the maximum amount of cash that can be returned when a check is tendered
for an amount greater than the amount of the sale. For example, if the check change limit is $10.00 the
maximum amount that can be tendered into the check key on a $5.00 sale is $15.00.
Programming the Check Change Limit
1. Turn the control lock to the P position.
2. To begin the program, enter 1 2 0 0, press the SBTL key.
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
4. Press the CASH key to finalize the program.
2 0 0 SBTL 1
CASH
X/TIME
Enter the cash
limit, up to 8
digits