20 Cubis
®
MCE Operating Instructions
Operating Concept
Level 1 Level 2 Level 3 Description
INPUT ID NO. Save the entered ID number for the device.
LOT ID Activates / deactivates the printout of a line for the LOT ID
in the GLP printout. The LOT ID can be entered in the line
manually.
DATE Set the date.
TIME Set the time.
USER.PASS. Set the user password.
DEL.PASS. Delete the user password. The menu is only available if a
user password is set.
SERV.PASS. Activate the service mode.
CAL.WT.
“Calibration weight”
Define the value of the external user calibration weight.
INFO
“Device
information”
VERSION
“Version number”
Display the software version number.
SER. NO.
“Serial number”
Display the device’s serial number.
MODEL Display the device’s model ID.
APC VER. Display the version of the APC processor.
BAC VER. Display the version of the BAC processor.
MCU VER. Display the version of the MCU processor.
LANGUAGE Change the menu language.
To Next Page
Loading...
Need help?
General