Sartorius Cubis MCE Series User Manual

Cubis
®
MCE Operating Instructions 19
Operating Concept
Level 1 Level 2 Level 3 Description
PRNT.PARA.
“Printout settings”
ACTIVATE
“Triggers”
Define whether a printout is triggered via a software
command or using the [Print] key.
FORMAT Define the format for the printout (characters per line).
PRT.INIT.
“Initializing”
Define the settings for printer initialization.
GLP Define the settings for the GLP printout.
TAR./PRT.
“Tare / print”
Activate / deactivate automatic taring after every print
process.
TIME Define the time format.
DATE Define the date display format.
PC.DIRECT
Direct transfer of data
(PC)
DEC.SEPAR. Define the decimal separator character.
OUTP.FORM. Define the output format for the data exchange between
the balance and the PC.
APPLIC.
“Applications”
WEIGH
(Factory setting)
UNIT Activate / deactivate the “Toggle between weight units”
function for all applications.
COUNT RESOLUT. Define the display of the weight value for the “Counting”
application.
REF.UPDT.
“Reference updating”
Activate / deactivate automatic reference updating for the
“Counting” application.
PERCENT
“Weighing in percent”
DEC.PLCS
“Decimal places”
Define the number of decimal places for the “Weighing in
percent” application.
NET-TOTL.
“Net-total”
COMP.PRT.
“Component printout”
Activate / deactivate the component printout for the
“Net-total” application.
TOTAL
“Totalizing”
COMP.PRT.
“Component printout”
Activate / deactivate the component printout for the
“Totalizing” application.
ANIMALW.
“Animal weighing”
ACTIVITY
“Animal activity”
Define the level of activity of the sample for the “Animal
weighing” application.
START Define the trigger for starting the animal weighing.
CALC.
“Calculation”
METHOD Define the method of calculation for the “Calculation”
application.
DEC.PLCS
“Decimal places”
Define the number of decimal places for the “Calculation”
application.
DENSITY
“Density
determination”
DEC.PLCS
“Decimal places”
Define the number of decimal places for the “Density
determination” application.
STATIST.
“Statistics”
COMP.PRT.
“Component printout”
Activate / deactivate the component printout for the
“Statistics” application.
TAR./STAT.
“Tare / statistics”
Activate / deactivate automatic taring for the “Statistics”
application.
UPDATE Start a firmware update. The menu is only available if a
USB mass storage device is connected.

Sartorius Cubis MCE Series Specifications

General

Brand	Sartorius
Model	Cubis MCE Series
Category	Scales
Language	English