Satel INTEGRA Plus - User types; User Management Details; 5.8.1 User types

24 Programming SATEL
Tamper in part.
EOL R1 resistor
EOL R2 resistor
EOL R3 resistor
CA-64 EPS / INT-ADRPS / CA-64 ADR / INT-OPS / CA-64 OPS / IN-ORSPS / CA-64 PP
No autorst.3t.
Tamper in part.
AC loss delay
CA-64 EPSi (v. 2.00/2.01)
No autorst.3t.
Tamper in part.
EOL Rp resistor
AC loss delay
CA-64 EPSi (v. 4.00)
No autorst.3t.
Tamper in part.
EOL R1 resistor
EOL R2 resistor
AC loss delay
INT-EPS / INT-IORSPS / INT-PPPS
No autorst.3t.
Tamper in part.
EOL R1 resistor
EOL R2 resistor
EOL R3 resistor
AC loss delay
INT-KNX
No autorst.3t.
Partition
KNX control
Out addresses
Outputs
Telegrams
Factory sets
INT-AV
INT-AV code
Verify s1A
Code=1tone s1A
Verify s1B
Code=1tone s1B
Verify s2A
Code=1tone s2A
Verify s2B
Code=1tone s2B
Options
Microphone n [n = microphone number (1...4)]
Speaker n [n = speaker number (1...4)]
Only listen
AVT buttons
Sound signal.
Silent alarm
Satel commands
Wait aft.event