Satel INTEGRA Plus - GPRS Communication Parameters

SATEL INTEGRA Plus 33
3.2.4 GPRS communication parameters
Programming the parameters
Control panel settings
Settings related to working in conjunction with the INT-GSM module / GSM module which
enables GPRS communication can be configured when programming the telephone options
(see: “Telephone options” p. 68).
INT-GSM module / GSM module settings
For description of parameters and options, please refer to the INT-GSM module / GSM
module manual.
DLOADX program settings
The settings for communication using the INT-GSM module can be configured in the
“Connection settings” window (the command for opening this window is available in the
“Communication” menu; you can also use the Ctrl+R key combination).
Settings related to communication via the GSM module are configured when establishing
connection.
Description of the parameters
Control panel settings
Options related to working in conjunction with the INT-GSM module / GSM module are
described in section “Telephone options” (p. 68).
INT-GSM module / GSM module settings
For description of parameters and options, please refer to the INT-GSM module / GSM
module manual.
DLOADX program settings
These settings apply to communication using the INT-GSM module connected to the
do keypad bus of the control panel. The settings do not apply to the INT-GSM module
connected to the ETHM-1 Plus module, or the SATEL GSM module.
TCP/IP connection: DLOADX – ETHM/INT-GSM
The settings below apply to direct communication with the module.
Connection – select the set of parameters that will be used for establishing communication:
PORT and DLOADX KEY.
LAN/WAN – you can enter the parameters yourself.
GSM: INT-GSM, Address n [n=module address] – settings of the INT-GSM module with
the given address will be used.
Port – the number of TCP port used for communication between the control panel and
computer with DLOADX program via the INT-GSM module. You can enter a value from 1
to 65535. Default value: 7090.
DLOADX key – a string of up to 12 alphanumeric characters (digits, letters and special
characters), used for data encryption during communication between the control panel and
the computer with DLOADX program via the INT-GSM module.
SATEL server
The settings below apply to communication with the module via the SATEL server.
Connection – select the set of parameters that will be used for establishing communication:
INT-GSM ID, INT-GSM IMEI and DLOADX KEY.
IMEI (INT-GSM) – you can enter the parameters yourself.