Satel INTEGRA Plus - Monitoring Station 1; Monitoring Station 2

SATEL INTEGRA Plus 85
Send event partition name – the option refers to the SIA format. If it is enabled, the name of
partition where the event occurred will also be sent along with the event code.
Each data block conf. required – the option refers to the SIA format. If it is enabled, the
control panel waits for acknowledgement by the monitoring station of receiving each data
block. The option refers to the telephone reporting.
Extended charset – the option refers to the SIA format. If it is enabled, not only ASCII
characters, but also national characters can be sent.
Fig. 11. Example of reporting settings in the DLOADX program.
10.1.2 Monitoring station 1 / Monitoring station 2
Reporting format [Tel. 1 format] – format in which event codes are sent to the monitoring
station.