Satel INTEGRA Plus - 6.2 Functions available from the partition keypad

SATEL INTEGRA Plus 37
Additionally, you need to configure settings of the SATEL GSM module connected to the
control panel (see: GSM module manual).
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select the “ISDN/GSM modem” in it. A window will
open in which modem initialization information will be displayed.
3. Send to the GSM module connected to the control panel the following SMS message:
xxxxxx. or xxxxxx= (“xxxxxx” – the control command programmed in the GSM module,
initializing communication with the DLOADX program through modem) – the control
panel will call, via the GSM module, the programmed computer telephone number,
xxxxxx=yyyy. or xxxxxx=yyyy= (“xxxxxx” – the control command programmed in the
GSM module, initializing communication with the DLOADX program through modem;
“yyyy” – computer telephone number to which the control panel is to connect) – the
control panel will call, via the module, the telephone number sent in the SMS message
(the computer telephone number programmed in the control panel will be ignored).
4. The DLOADX program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the “Configuration” window, “Modem” tab). A suitable message will inform about the
connection being established.
Connection initiated by the control panel – built-in modem
Control panel settings:
• program the telephone number of modem connected do computer.
DLOADX program settings:
• configure the modem communication parameters.
1. Click on the button in the DLOADX program.
2. A drop-down menu will be displayed. Select the “Modem 300 bps” in it. A window will
open in which modem initialization information will be displayed.
3. In the LCD keypad connected to the control panel, start the START DWNL-TEL function
([code] DOWNLOADING START DWNL-TEL). The function is available to the installer,
administrator and user having the DOWNLOADING STARTING right.
4. The control panel will call the programmed computer telephone number.
5. The DLOADX program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the “Configuration” window, “Modem” tab). A suitable message will inform about the
connection being established.
Connection initiated by the control panel – external modem
Control panel settings:
• program the telephone number of modem connected do computer,
• enable the EXTERNAL MODEM option,
• if a GSM or ISDN modem is connected to the control panel, enable the MODEM
ISDN/GSM/ETHM option,
DLOADX program settings:
• configure the modem communication parameters.
1. Click on the button in the DLOADX program.