SATO CG4 Series - Page 120

Section 8: Appendix
Page 8-4
CG4 Series Service Manual
8.1 OPTIONAL ACCESSORIES - CUTTER (cont’d)
• Cutting Media with Perforation
As for media with perforation,
cutting on or in front of
the perforated lines is prohibited
. Cutting in those
locations could cause the media to jam and the printer to
malfunction.
The perforated line +1 mm (+0.04”) is the cut prohibited
zone (see Figure 1).
The folded perforated line +4 to +25 mm (+0.15” to
+0.98”) of fan-folded paper is the cut prohibited zone
(see Figure 2).
8.1.4 Cutter Unit replacement
Over time, the cutter loses its cutting ability and begins to show
signs of wear.
Replace the cutter unit when the blade becomes blunt and cut
edges are rough. Please refer to
Section 7.13 Cutter Kit/
Board/Unit Replacement (Optional)
for the detailed
procedures.
Figure 1
Cut prohibited zone
(1mm, 0.04”)
Perforated line
Figure 2
Fold perforation
25 mm, 0.98”
4 mm, 0.15”
123 —
321
654
— 456