SATO CG4 Series Service Manual

Section 2: General Specifications
Page 2-4 CG4 Series Service Manual
MODEL NAME
CG408 DT CG412 DT CG408 TT CG412 TT
SELF-DIAGNOSIS
Cover Open Detection
Paper End Detection
Test Print
Cutter error (Only available if installed)
Cover Open Detection
Paper Detection
Test Print
Ribbon end Detection
Cutter error (Only available if installed)
CHARACTER FONT CAPABILITIES
BITMAP FONTS
U 5 dots W x 9 dots H (Alphanumeric characters and symbols)
S 8 dots W x 15 dots H (Alphanumeric characters and symbols)
M 13 dots W x 20 dots H (Alphanumeric characters and symbols)
WB 18 dots W x 30 dots H (Alphanumeric characters and symbols)
WL 28 dots W x 52 dots H (Alphanumeric characters and symbols)
XU 5 dots W x 9 dots H (Alphanumeric characters and symbols)
XS 17 dots W x 17 dots H (Alphanumeric characters and symbols)
XM 24 dots W x 24 dots H (Alphanumeric characters and symbols)
XB 48 dots W x 48 dots H (Alphanumeric characters and symbols)
XL 48 dots W x 48 dots H (Alphanumeric characters and symbols)
OA Font (OCR-A)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
OB Font (OCR-B)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
KANJI FONTS
Supported by downloading one of the following kanji fonts.
1) Simplified Chinese (2.6MB)
Gothic type GB2312 (24 x 24 dot)
2) Korean (1.6MB)
Gothic type KSX1001 (16 x 16 dot)
Mincho type KSX1001 (24 x 24 dot)
OUTLINE FONTS
Alphanumeric characters and symbols
CHARACTER CONTROL
Magnification Expansion up to 12 x in either the vertical or horizontal
Rotation 0°, 90°, 180° and 270°

SATO CG4 Series Specifications

General

Brand	SATO
Model	CG4 Series
Category	Printer
Language	English