Section 4: Operation and Configuration
CG4 Series Service Manual Page 4-23
4.12 FACTORY CLEAR MODE (cont’d)
*1. To be connected by Port1024 and Port1025 (2 port connections) or Port 9100 (1 port connection)
No. Items to be initialized Setting value
18 Initial Feed Disabled
19 Auto Feed Disabled
20 Operation mode Continuous - (No setting)
Tear-Off - (No setting)
Cutter Mode 1 (Head position)
Dispenser Mode 1 (Head position)
Nonsepa (Linerless)
Mode 2 (Tear off position)
21 Interface RS-232C Baud rate=19200 bps, Data bit=8 bit, Parity=None,
Stop bit=1 bit, Protocol=Protocol for driver
LAN Protocol for driver (ENQ response mode) *1
USB - (No initial setting)
22 Tear Off Waiting Time 1000 ms
To Next Page
Loading...
