Scania DC11 - Temperature Monitor and Sensor Checks; Checking Temperature Monitor; Checking Temperature Sensor

30
©
Scania CV AB 2011, Sweden
01:03-02
Removing the cylinder head (engines with HPI unit injectors)
1 Clean the rocker cover and the area around
it.
2 Remove the top part of the rocker cover.
3 Relieve the pressure on the valves by
undoing the bolts on the rocker arm shaft
alternately.
120515
3
4 Remove the rocker arm shaft.
120520
4
Cylinder head
www.motodiesel.ir
MASHINESOFT.COM
09120146259