Schenck process Intecont Plus Belt Weigher User Manual

Connector Size
FIP
X1
X2
X3
X5
X6
X7
X8
X9
Phoenix contact spacing 5mm : 6 pins
Phoenix contact spacing 5mm : 4 pins
Phoenix contact spacing 5mm : 7 pins
Phoenix contact spacing 5mm : 8 pins
Phoenix contact spacing 5mm : 8 or 10 pins
SUB-D: 9 pins
SUB-D: 9 pins
Phoenix contact spacing 5mm : 12 pins
VEG
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
Phoenix contact spacing 5mm : 6 pins
Phoenix contact spacing 5mm : 4 pins
Phoenix contact spacing 3.5mm : 6 pins
SUB-D: 9 pins
Phoenix contact spacing 3.5mm : 7 pins
Phoenix contact spacing 3.5mm : 11 pins
Phoenix contact spacing 3.5mm : 8 pins
Phoenix contact spacing 5mm : 10 pins
Phoenix contact spacing 3.5mm : 9 pins
Phoenix contact spacing 3.5mm : 7 pins
0837
INTECONT PLUS VBW
Replacement Instructions
BV-H2214 GB 113
Transmission to third parties and reproduction of
this documentation are not permitted.
SchenckProcess GmbH reserves all rights of
ownership and copyrights.
Technische
Redaktion PDE-RD

Schenck process Intecont Plus Belt Weigher Specifications

General

Brand	Schenck process
Model	Intecont Plus Belt Weigher
Category	Measuring Instruments
Language	English