A.4
SEL-387-0, -5, -6 Relay Instruction Manual Date Code 20170601
Firmware and Manual Versions
Firmware
SEL-387-0-R602-V0-Z003003-D20020118
SEL-387-5-R602-V0-Z003003-D20020118
SEL-387-0
➤ Added support for new DSP.
➤ Added support for faster CPU.
➤ Added Relay Word bit CTS for SELOGIC Control Equation use.
➤ Changed front-panel breaker monitor display scroll time from 0.5
seconds to 2 seconds.
➤ Changed prompt reset to read “Port 4” instead of “Port F.”
➤ Increased the O87P setting range.
➤ Added “n” command option to the CHI command. “CHI n” will
now return the last n items contained in the history.
➤ Added CID to STA command.
➤ Updated FID string to include four-digit year.
➤ Added capability of using mismatched CRTs in the combined cur-
rent elements.
➤ Added “23” combination for REF Directional Element (See Figure
3.14: REF Directional Element).
➤ Added the STA C (Status Clear) command option.
➤ Changed the CASCII command to level 0.
➤ Added EVE T that displays short event summary.
➤ Added VDC to Fast Meter response.
SEL-387-0 and SEL-387-5
➤ Corrected ADC power up.
SEL-387-5
➤ Modified CEV report to improve compatibility with the SEL-5601.
20011219
Supports PROTO=DNP
SEL-387-5-R600-V0-Z102102-D20010910
Does Not Support PROTO=DNP
SEL-387-5-R500-V0-Z002002-D20010910
➤ Added support for new DSP.
➤ Added support for faster CPU.
➤ Changed front-panel breaker monitor display scroll time for 0.5
seconds to 2 seconds.
20010910
Supports PROTO=DNP
SEL-387-5-R408-V0-Z102102-D20010518
SEL-387-6-R403-V0-Z102102-D20010518
Does Not Support PROTO=DNP
SEL-387-5-R307-V0-Z002002-D20010518
SEL-387-6-R302-V0-Z002002-D20010518
➤ Added harmonic restraint function.
➤ Added dc ratio blocking feature.
➤ Added dc battery voltage to the binary Fast Meter.
➤ Changed prompt reset to read “Port 4” instead of “Port F.”
➤ Added feature to check the number of rising and falling edges.
➤ Increased the O87P setting range.
20010518
SEL-387-R105-V0-D20000629
Supports PROTO=DNP
SEL-387-5-R407-V0-Z101101-D20001220
SEL-387-6-R402-V0-Z101101-D20001220
Does Not Support PROTO=DNP
SEL-387-5-R306-V0-Z001001-D20001121
SEL-387-6-R301-V0-Z001001-D20001121
➤ Manual update only (see Table A.2). 20010330
SEL-387-R105-V0-D20000629
SEL-387-5-R407-V0-Z101101-D20001220
SEL-387-6-R402-V0-Z101101-D20001220
SEL-387-5-R306-V0-Z001001-D20001121
SEL-387-6-R301-V0-Z001001-D20001121
➤ Manual update only (see Table A.2). 20010209
Supports PROTO=DNP
SEL-387-5-R407-V0-Z101101-D20001220
SEL-387-6-R402-V0-Z101101-D20001220
➤ Corrected Object 32 in DNP versions. 20001220
Table A.1 Firmware Revision History—SEL-387-0, -5, -6 Relay (Sheet 3 of 5)
Firmware Identification (FID) Number Summary of Revisions
Manual
Date Code
To Next Page