106
www.sauservice.com
(1) Press either
▲
or
▼
PIC - ADJ button.
The on-screen menu will have one
item in purple and 6 items in white.
(3) Press the SET button (to decide selection).
When the selection of the
CONTRAST adjustment mode is
decided, the adjustment data scale bar
appears on the screen.
(4) Make adjustment by using either or
ADJUST button.
As the Cursor is moved, the
adjustment data value changes. Make
adjustment so as to obtain the desired
on-screen contrast status.
(5) Press the WRITING button (for storing and
finish).
(2) Choose CONTRAST by using either
▲
or
▼
PIC - ADJ button.
The WRITING display appears and
the adjustment data is stored.
● When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET
button.
● To continue adjusting other menu items, repeat procedure (2)~(5).
● Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned
off and the pre-adjustment status will remain when the power is turned on next time.
Have CONTRAST displayed in
purple. Since CONTRAST is
selected initially, no particular
operation is required in this case.
Although the on-screen picture quality has been adjusted at the time of shipment from the factory, the
on-screen contrast can be readjusted if desired. When the Game Board is replaced, readjustment may be
necessary. Changing the CONTRAST causes the light and shade of the on-screen images to be changed.
Herein,
procedure (2)
is skipped.
ADJUSTING THE ON-SCREEN CONTRAST
To Next Page
Loading...
