135
www.sauservice.com
17-3 REPLACING THE MAIN BOARD BATTERY
● To prevent overheating, explosion, or fire:
• Do not recharge, disassemble, heat, incinerate, or short the battery.
• Do not allow the battery to come into direct contact with metallic objects or other
batteries.
• To preserve the battery, wrap it in tape or other insulating material.
● Follow local regulations when disposing of the battery.
Improper disposal can damage the environment.
To avoid risk of malfunction and damage:
• Make sure the positive and negative ends are aligned correctly.
• Use only batteries approved for use with this unit.
If an error appears indicating that the battery power is very low within the first year of
use, it is usually an indication of a problem or abnormality with something other than the
battery. Be sure to inspect the board that the battery is connected to.
● There is a Media Board But-
ton Battery underneath the
Media Board.
FIG. 17. 3
● Carefully remove the battery from its holder.
● Insert a new battery into the holder with the "+" terminal facing up.
CAUTION!
STOP
IMPORTANT!
WARNING!
To Next Page
Loading...
