41
www.sauservice.com
When the game machines of a same or similar type are installed side by side, their sensors may interfere
with each other. To reject the interference, follow the procedure below.
The following game machines employ a same or similar type of sensor. If interference happens to the
sensors, operation of the games may be mutually disturbed.
● THE HOUSE OF THE DEAD 2, U/R type, DX type and Super DX type
● DEATH CRIMSON, U/R type and DX type
● THE LOST WORLD, U/R type, DX type and Super DX type
● BRAVE FIRE FIGHTERS
● SAMBA DE AMIGO
● CONFIDENTIAL MISSION, U/R type and DX type
● SHAKATTO TAMBOURINE
● LUPIN THE 3
RD
THE SHOOTING, U/R type and DX type
● THE MAZE OF THE KINGS, U/R type and DX type
● THE HOUSE OF THE DEAD 3, U/R type and DX type
● VIRTUA COP 3, U/R type and DX type
● GHOST SQUAD, U/R type and DX type
PHOTO 6. 9 a
● In order to prevent electric shock and short circuit hazards, be sure to turn power off
before performing work.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
● Do not expose the IC BD, etc. without a good reason. Failure to observe this can
cause electric shock hazard or malfunctioning.
● Work should be performed by the Location's Maintenance Man or technical person-
nel. Performing work by those who do not have technical knowledge and expertise
can cause electric shock accident or malfunctioning.
Interference Prevention Wiring
● Turn the power off.
● Undo the 2 truss screws and remove the side door
L from the main cabinet.
TRUSS SCREW (2), black T
M4×40, flat washer used
SIDE DOOR L
WARNING!
To Next Page