108
www.sauservice.com
(1) Press either
▲
or
▼
PIC - ADJ button.
The on-screen menu will have one item
in purple and 6 items in white.
(2) Choose H. POSI or V. POSI by using either
▲
or
▼
PIC - ADJ button.
When the selection of the
H. POSI or V. POSI is decided, the
adjustment data scale bar appears on the
screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and finish).
(4) Make adjustment by using either
or ADJUST
button.
● When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET
button.
● To continue adjusting other menu items, repeat procedure (2)~(5).
● Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned
off and the pre-adjustment status will remain when the power is turned on next time.
Have the H. POSI or V. POSI displayed
in purple. The Figure shows the status in
which
H. POSI is selected.
When making adjustments
in vertical directions,
also use either or
ADJUST button.
The WRITING display appears and the
adjustment data is stored.
As the Cursor is moved, the adjustment
data value changes. Make adjustment
so as to obtain the desired on-screen
position status.
Although the on-screen display position (H. POSI, V. POSI) has been adjusted at the time of shipment
from the factory, readjustment can be made if desired. When the Game Board is replaced, readjustments
may be necessary.
ADJUSTING THE ON-SCREEN DISPLAY POSITION
To Next Page
Loading...
