39
www.sauservice.com
9-2 C.R.T. TEST
In the TEST mode menu, selecting C.R.T.
TEST allows the screen (on which the pro
-
jector is tested) to be displayed. Although
the projector adjustments have been made at
the time of shipment from the factory, make
judgment as to whether an adjustment is
needed by watching the test mode screen. If
it is necessary, adjust the projector by refer
-
ring to Section 12.
Selecting the INPUT TEST on the game test
mode menu screen causes the screen (on
which each switch is tested) to be displayed.
Press each switch. If the display beside each
switch indicates "ON," the switch and wir-
ing connections are satisfactory.
C.R.T. TEST 1/2
1 32
RED
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE
C.R.T. TEST 2/2
PRESS TEST BUTTON TO EXIT
9-3 INPUT TEST
INPUT TEST
PLAYER 1 2
TRIGGER OFF OFF
ACTION OFF OFF
CHANGE OFF OFF
CARD IN OFF OFF
GUN-X 00H 00H
GUN-Y 00H 00H
SCREEN OUT OUT
START OFF OFF
SERVICE OFF
TEST OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
To Next Page
Loading...
