78
www.sauservice.com
GAME TEST MENU
INPUT TEST
OUTPUT TEST
GAME ASSIGNMENTS
GUN ADJUSTMENT
CARD READ/WRITE TEST
CLOSE SETTING
BOOKKEEPING
BACKUP DATA CLEAR
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
9-3 GAME TEST MODE
When changing the game configuration, changes will not take effect until the Game Test
Mode has been completed. Be sure to exit the Game Test Mode properly after configu
-
ration changes.
FIG. 9. 3 GAME TEST MENUscreen
Performs tests, adjustments and settings for each of the Game Test Menu screen items below.
A. INPUT TEST : Tests each input device used in the game.
B. OUTPUT TEST : Tests each output device used in the game.
C. GAME ASSIGNMENTS : Adjusts game settings.
D. GUN ADJUSTMENT : Performs sight settings for the game's Control Unit (Gun).
E. CARD READ/WRITE TEST : Tests the reading and writing of IC Cards.
F. CLOSE SETTING : Sets store closing time.
G. BOOKKEEPING : View all recorded game data.
H. BACKUP DATA CLEAR : Erase all game records.
After selecting an item, read the explanations below regarding operation.
After performing tests and adjustments, return to the Game Test Menu screen, select EXIT and press the
TEST Button.
You will return to the System Menu screen. Move the cursor to EXIT on the System Menu screen and
press the TEST Button to return to the Game Play screen.
Select ENTER GAME TEST from the System Menu screen to display the Game Test Menu screen as
follows.
Use the SERVICE Button to move the cursor to the desired test item.
Press the TEST Button to enter the selected item's test.
STOP
IMPORTANT!
To Next Page
Loading...
