46
www.sauservice.com
FIG. 8
8. GAME DESCRIPTION
The following explanations apply to the case the product is functioning satisfactorily. Should there be
any moves different from the following contents, some sort of faults may have occurred. Immediately
look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation.
The fluorescent lights in the billboard and in the instruction panel are always on whenever the power is
turned on. Demo movies and game rankings are displayed on the screen.
In addition, the halogen lamp, the left and right controller holder LEDs and the LED under the IC card
unit are all turned on. Audio may also be played from speakers on the left and right sides of the main
cabinet. However, it is possible to select whether sound is played during advertising or not using the Test
mode settings.
Each of the right and left start buttons is integrated with a light. The light flashes when coins are inserted
sufficiently for a play. The light goes out when the start button is pressed to start the game.
Press the appropriate start button to begin play as 1P or 2P. If enough credits for a game are remaining,
the other player's START button will flash. Press the flashing START button to join a game.
1P START BUTTON
1P GAME CONTROLS
2P START BUTTON
2P GAME CONTROLS
ACTION BUTTON
TRIGGER
SHOT SELECTOR
CABINET
GUN CONTROLLER
To Next Page
Loading...
