107
www.sauservice.com
(1) Press either
▲
or
▼
PIC - ADJ button.
The on-screen menu will have
one item in purple and 6 items
in white.
(2) Choose BRIGHTNESS by using either
▲
or
▼
PIC - ADJ button.
Have the BRIGHTNESS
displayed in purple.
When the selection of the
BRIGHTNESS adjustment
mode is decided, the
adjustment data scale bar
appears on the screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and finish).
(4) Make adjustment by using either
or ADJUST
button.
● When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET
button.
● To continue adjusting other menu items, repeat procedure (2)~(5).
● Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned
off and the pre-adjustment status will remain when the power is turned on next time.
The WRITING display appears
and the adjustment data is
stored.
As the Cursor is moved, the
adjustment data value changes.
Make adjustment so as to
obtain the desired on-screen
brightness status.
Although the on-screen picture quality has been adjusted at the time of shipment from the
factory, readjustment can be made if desired. When the Game Board is replaced, readjustment
may be necessary. Changing the BRIGHTNESS causes the brightness of the on-screen images
of black portions to be changed.
ADJUSTING THE SCREEN BRIGHTNESS
To Next Page
Loading...
Need help?
General
