129
www.sauservice.com
● Turn the power off.
● Remove the side door R from the main cabinet. Undo the 2 truss screws and open the lock.
17-1 REMOVING THE GAME BOARD
PHOTO 17. 1 a
17. GAME BOARD
● In order to prevent electric shock and short circuit hazards, be sure to turn power
off before performing work.
● Be careful not to damage the wires. Damaged wires may cause electric shock or
short circuit or present a fire risk.
● Do not expose the Game BD, etc. without a good reason. Failure to observe this
can cause electric shock hazard or malfunctioning.
● Do not use this product with connectors other than those that were connected and
used with the Game Board at the time of shipping. Do not carelessly connect wires
to connectors that were not used at the time of shipping, as this may cause over-
heating, smoke or fire damage.
● In this product, setting changes are made during the test mode. The Game BD need
not be operated. Use the Game BD, etc. as is with the same setting made at the
time of shipment so as not to cause electric shock and malfunctioning.
● Static electricity from your body may damage some electronics devices on the IC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.
TRUSS SCREW (2), black
M4×40, flat screw used
Unlock.
SIDE DOOR R
To Next Page
Loading...
