123
www.sauservice.com
● Fuse replacements other than those specified can cause accidents and are strictly
forbidden. In case fuse replacements other than those stated in this manual are
necessary, contact where you purchased the product from for inquiries regarding this
matter.
● To prevent accidents due to electrical shock, always turn the power off and disconnect
the power plug from the power outlet before performing any task that involves
touching the interior of the product.
● Be careful not to damage the wires. Damaged wires may cause electric shock, short
circuit or present a risk of fire.
● Be sure to use fuses meeting the specified rating. Using fuses exceeding the specified
rating can cause fire and electric shock accidents.
● After eliminating the cause of a blown fuse, replace the fuse. Depending on the cause
of the fuse blow, continued use with the blown fuse can cause generation of heat and
present a risk of fire.
● There is a risk of burns due to heat of the globe-shaped fluorescent light. Take the
appropriate precautions when you are replacing the light.
REPLACING THE FUSE
● Turn the power off.
● Undo the 4 screws using the supplied L-wrench and remove the instruction panel.
HEXAGON SOCKET SCREW (4)
M5×10, special washer used
INSTRUCTION PANEL
PHOTO 16. 1 a
WARNING!
To Next Page
Loading...
Need help?
General
