96
www.sauservice.com
11. IC CARD UNIT
● When working with the product, be sure to turn the power off. Working with the
power on can cause an electric shock or short circuit accident.
● Be careful not to damage the wires. Damaged wires may cause electric shock, short
circuit or present a risk of fire.
● Be careful not to lose the fasteners for the screws and nuts. Contact between metal
fasteners and electrically live parts can cause electric shock, short circuit or fire.
● Be careful not to trap your fingers when opening or closing the control panel.
● The solenoid on the IC card unit may become hot. Take care as there is a risk of
accidental burns.
Clean the interior of the IC card unit once a month.
At the same time, check to make sure that no intentional damage has been done to the game unit.
Because IC cards are inserted into the IC card unit for each play, it may become dirty and foreign matter
may collect in the unit.
Observe the following points to prevent damage when cleaning accessory
surfaces.
● Remove smears using a dry, soft cloth (flannel, etc.). Do not use coarse gauze or
other harsh materials.
● For smear removing solvent, alcohol (ethanol) is recommended. When using
chemical detergent, be sure to follow the instructions below:
• Soak a soft cloth in a neutral household detergent diluted with
water. Wring the cloth well then clean down the surface.
• Do not use bleach or detergent that contains abrasive agents.
• Do not use alkaline chemical detergents such as "glass cleaner"
available on the market or solvents such as thinner, etc.
● Do not scrape or scratch surfaces using brushes, scouring pads or other hard
cleaning utensils.
11-1 HOW TO CLEAN THE IC CARD UNIT
CAUTION!
WARNING!
CAUTION!
To Next Page
Loading...
Need help?
General
