109
www.sauservice.com
(1) Press either
▲
or
▼
PIC - ADJ button.
(2) Choose H. SIZE or V. SIZE by using either
▲
or
▼
PIC - ADJ button.
When the selection of the
H. SIZE or V. SIZE adjustment mode is
decided, the adjustment data scale bar
appears on the screen.
(3) Press the SET button (to decide selection).
(5) Press the WRITING button (for storing and finish).
As the Cursor is moved, the adjustment
data value changes. Make adjustment
so as to obtain the desired on-screen
position status.
(4) Make adjustment by using either or ADJUST
button.
● When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET
button.
● To continue adjusting other menu items, repeat procedure (2)~(5).
● Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned
off and the pre-adjustment status will remain when the power is turned on next time.
When making adjustments
in vertical directions, also
use either or button.
The on-screen menu will have one item
in purple and 6 items in white.
Have the H. SIZE or V. SIZE displayed
in purple. The Figure shows the status in
which
H. SIZE is selected.
The WRITING display appears and the
adjustment data is stored.
Although the on-screen size (H. SIZE, V. SIZE) has been adjusted at the time of shipment from the
factory, readjustment can be made if desired. When the Game Board is replaced, readjustments may be
necessary.
ADJUSTING THE SCREEN SIZE
To Next Page
Loading...
