133
www.sauservice.com
● Take off the 4 screws to remove the GD-ROM drive.
Take out the ASSY MAIN BD from the main cabinet; and then remove the GD-ROM drive from the
ASSY MAIN BD as follows:
● Carry out the "Removing the Game Board" procedures and remove the ASSY MAIN BD from the
cabinet.
● Remove the GD cable connector and the AC cable connector from the GD-ROM drive.
REMOVING THE GD-ROM DRIVE
PHOTO 16. 1 j
PHOTO 16. 1 k
SCREW (4) t
M4×16, w/flat & spring washers
GD CABLE CONNECTOR
AC CABLE CONNECTOR
To Next Page
Loading...
