40
www.sauservice.com
OUTPUT TEST
PLAYER 1 START LAMP OFF
PLAYER 2 START LAMP OFF
PLAYER 1 HALOGEN LAMP OFF
PLAYER 2 HALOGEN LAMP OFF
PLAYER 1 HOLDER LAMP OFF
PLAYER 2 HOLDER LAMP OFF
PLAYER 1 GUN REACTION OFF
PLAYER 2 GUN REACTION OFF
COIN LED OFF
-> EXIT
SELECT WITH SERVICE BUTTON
9-4 OUTPUT TEST
Select OUTPUT TEST from the menu in the test mode to cause the screen (on which each lamp and wir
-
ing connections are tested) to appear. Ensure that lamp light up satisfactorily.
Perform the above inspections also at the time of monthly inspection.
As for the gun adjustment described in Part (5) above, weekly confirm that the gun is properly adjusted.
9-5 GUN ADJUSTMENT
Before starting the operation, play the game by yourself and make sure that the gun readjustment is not
needed and that you can play the game without a problem. Although completed at the factory, the gun
adjustment may be necessary because of the moving/shipping divergence.
●
● ● ●
●
GUN ADJUSTMENT
PLAYER 1 PLAYER 2
-> TOP 5 233 -> TOP 5 233
LEFT -318 17 LEFT -318 17
CENTER -10 15 CENTER -10 15
RIGHT 242 34 RIGHT 242 34
BOTTOM -10 -204 BOTTOM -10 -204
DEFAULT DEFAULT
CANCEL CANCEL
CURSOR CURSOR
SELECT WITH SERVICE BUTTON
AND PULL TRIGGER
PRESS TEST BUTTON TO EXIT
To Next Page
Loading...
