90
www.sauservice.com
To replace the Gun Controller's internal components, first separate the left shell (Cover L) and right shell
(Cover R). The controller's internal components are mounted on the right shell, so work with the gun
lying on its right side. To replace the Shot Selector button microswitch, first remove the Shot Selector
button from the right shell.
● Turn power off.
● Remove the 15 screws to separate the two shells.
PHOTO 10 a
FIG. 10 a
REPLACING THE MICROSWITCH
SCREW (15), black
M3×12, w/small flat & spring washers
To Next Page
Loading...
